Handpieces & Contra Angles

 Angled 1:1 Handpiece, 175 mm
Angled 1:1 Handpiece, 175 mmRef. 1962
Angled standard handpiece with a length of 175 mm and 1:1 transmission, with spray nozzle and quick release locking mechanism for instruments with a length of 125 mm and a shaft diameter of 2.35 mm.
Angled 1:1 Handpiece, 125 mm
Angled 1:1 Handpiece, 125 mmRef. 1960
Angled standard handpiece with a length of 125 mm and 1:1 transmission, with spray nozzle and quick release locking mechanism for instruments with a length of 70 mm and a shaft diameter of 2.35 mm.
1:3 Multiplier Handpiece
1:3 Multiplier HandpieceRef. 1063
1:3 Multiplier Handpiece, length 135 mm for up to 140’000 rpm; spray nozzle and quick release locking mechanism for instruments with a length of 70 – 95 mm and a shaft diameter of 2.35 mm.
1:1 Handpiece, 155 mm
1:1 Handpiece, 155 mmRef. 1952
General surgery handpiece with a length of 155 mm and 1:1 transmission, with spray nozzle and quick release locking system for instruments with a length of 125 mm and a shaft diameter of 2.35 mm.
Angled 1:1 Handpiece, 145 mm
Angled 1:1 Handpiece, 145 mmRef. 1961
Angled standard handpiece with a length of 145 mm and 1:1 transmission, with spray nozzle and quick release locking mechanism for instruments with a length of 95 mm and a shaft diameter of 2.35 mm.
1:1 Handpiece, 125 mm
1:1 Handpiece, 125 mmRef. 1951
General surgery handpiece with a length of 125 mm and 1:1 transmission, with spray nozzle and quick release locking mechanism for instruments with a length of 125 mm and a shaft diameter of 2.35 mm.
1:1 Handpiece, 105 mm
1:1 Handpiece, 105 mmRef. 1950
General surgery handpiece with a length of 105 mm and 1:1 transmission, with spray nozzle and quick release locking mechanism for instruments with a length of 70 mm and a shaft diameter of 2.35 mm.
1:1 Handpiece, 90 mm
1:1 Handpiece, 90 mmRef. 1710
General surgery handpiece with a length of 90 mm and 1:1 transmission, with spray nozzle and Quick release locking mechanism, for instruments with a length of 44 mm and a shaft diameter of 2.35 mm
1:1 Contra Angle
1:1 Contra AngleRef. 5050
With INTRA EN3964 coupling for drill bits with a shank diameter of 2.35 mm for a max. torque of 10 Ncm.
4:1 Contra angle L
4:1 Contra angle LRef. 5055
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 24 Ncm.
16:1 Contra angle L
16:1 Contra angle LRef. 5060
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 27 Ncm.
16:1 Contra angle PB
16:1 Contra angle PBRef. 5053
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 30 Ncm.
20:1 Contra angle PB
20:1 Contra angle PB
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 80 Ncm.
20:1 LED Contra angle
20:1 LED Contra angleRef. 5052
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 80 Ncm with Hexagon chuck.
32:1 Contra angle
32:1 Contra angleRef. 5054
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 55 Ncm.
32:1 Contra angle PB
32:1 Contra angle PB
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 80 Ncm.
70:1 Contra angle L
70:1 Contra angle LRef. 5065
With INTRA EN3964 coupling for drill bits of a shank diameter of 2.35 mm for a max. Torque of 10 Ncm.

We are working to make your job easier!

Ask a question